TM-9-2815-220-24 Maintenance Manual for AVDS-1790-2CA AVDS-1790-DA and AVDS-1790-2DR Engines Download
Page 869 of 1563
TM 9-2815-220-24 EXHAUST MANIFOLDS AND ASSOCIATED PARTS REPLACEMENT 0107 00 INSTALLATION 1. If removed, apply anti-seize compound (item 5, WP 0173) to three new pipe plugs (52) and install in exhaust manifold (38). 2. Install elbow (39) to manifold (38). a. Install elbow (39) to manifold (38) with a new a new gasket (51) (item 363, WP 0175) in position. b. Secure using four screws (50) and new self-locking nuts (49) (item 161, WP 0175). 3. Install 4-5-6 left exhaust manifold (38) and elbow (39) as an assembly. a. Install three new gaskets (47) (item 363, WP 0175) onto cylinders 4-5-6 left and put manifold (38) into position. b. Install new gasket (48) (item 327, WP 0175) and secure with manifold (38) to turbocharger using two new self-locking nuts (40) (item 161, WP 0175) and screws (39). Do not tighten self-locking nuts (40) at this time. c. Secure manifold (38) to cylinders 4-5-6 left with twelve new self-locking nuts (42) (item 161, WP 0175). Torque-tighten nuts (42) to 275 inch-pounds (31 N•m), using torque wrench (item 125, WP 0176). 4. Install plate (45) on studs (46) with two new self-locking nuts (43) (item 140, WP 0175) and flat washers (44). 45 46 44 43 49 51 50 41 39 48 40 52 38 42 47 WP 0107 00-9