TM-9-2815-220-24 Maintenance Manual for AVDS-1790-2CA AVDS-1790-DA and AVDS-1790-2DR Engines Download
Page 835 of 1563
TM 9-2815-220-24 ROCKER ARM ASSEMBLY AND COVER REPLACEMENT 0104 00 REMOVAL (Continued) NOTE Step 3 applies to both sides of all except the end cylinders. On the end cylinders (1 and 6, left and right), step 3 applies to the inboard side only. CAUTION Inter-cylinder sleeves are made of a rubber-type material and are easily damaged. The cylinder and rocker cover are made of aluminum and also are easily damaged. Take care when separating the sleeve from the cylinder not to damage either. Failure to comply may result in an oil leak. 3. Loosen inter-cylinder sleeves (6). a. Remove the top screw (7A), and loosen the bottom two screws (7) securing the flange (8) to the cylinder (9). b. Move flange (8) away from cylinder (9) as far as the loosened screws will allow. c. Using a piece of shim stock or other suitable tool, carefully separate inter- cylinder sleeve (6) from cylinder. 6 6 9 7 7A 8 7 WP 0104 00-3