Covering the politics, Business and technology of defense - Subscribe Today

TM-9-2815-220-24 Maintenance Manual for AVDS-1790-2CA AVDS-1790-DA and AVDS-1790-2DR Engines Download

Page 830 of 1563

TM 9-2815-220-24 FLYWHEEL AND ADAPTER REPLACEMENT (2DR) 0103 00 REMOVAL (Continued) NOTE Early model engines had lock plates securing the adapter fasteners. Remove and discard the lock plates. Lock plates are not used upon reinstallation; instead, increase the torque of the fastener to 1300-1350 inch-pounds (146.8-152.5 N•m). 6. Remove adapter (9) a. Use engine turning tool (3) to prevent PTO shaft (2) from turning. b. Remove screws (10) securing adapter (9) to crankshaft (11). c. Install three of the removed screws (10) into the threaded puller holes of adapter (9). d. Alternately tighten screws (10) to pull adapter (9) from dowel pins (12) in crankshaft (11). 12 2 9 3 11 10 CLEANING 1. See Work Package 0028 for General Cleaning Procedures. INSPECTION All parts must be inspected with care. Replace parts if damage or wear exceeds allowable limits. 1. See Work Package 0028 for General Inspection Procedures. WP 0103 00-4