TM-9-2815-220-24 Maintenance Manual for AVDS-1790-2CA AVDS-1790-DA and AVDS-1790-2DR Engines Download
Page 828 of 1563
TM 9-2815-220-24 FLYWHEEL AND ADAPTER REPLACEMENT (2DR) 0103 00 WP 0103 00-2 REMOVAL 1. Position flywheel (4) for removal. a. Rotate PTO shaft (2) with turning tool (3). b. Position flywheel (4) so that lifting eyebolt hole (A) is at top center. 2 3 A 4 2. Install eyebolt (5) (item 11, WP 0176) and attach hoist (6). 6 4 5 3. Remove eight screws (7) from flywheel (4). NOTE Early model engines had safety wire securing the flywheel fasteners. Remove and discard the wire and do not safety wire upon reinstallation. Instead, increase the torque of the fastener to 1300-1350 inch-pounds (146.8-152.5 N•m). 7