TM-9-2815-220-24 Maintenance Manual for AVDS-1790-2CA AVDS-1790-DA and AVDS-1790-2DR Engines Download
Page 826 of 1563
TM 9-2815-220-24 FLYWHEEL AND SPUR GEAR REPLACEMENT (2CA, 2DA) 0102 00 INSTALLATION (Continued) 3. Install spur gear (5). a. Place spur gear (5) in position on dowel pins (8) which protrude through flywheel (2). b. Fasten spur gear (5) and flywheel (2) to crankshaft with nine screws (4). c. Using torque wrench, 500 - 2500 inch/pounds, (item 126, WP0176) alternately tighten screws (4) to 1300-1350 inch-pounds (146.8-152.5 N•m). d. Go to beginning of this work package and check flywheel run-out if a new flywheel was installed. 2 4 5 8 8 END OF WORK PACKAGE WP 0102 00-6