TM-9-2815-220-24 Maintenance Manual for AVDS-1790-2CA AVDS-1790-DA and AVDS-1790-2DR Engines Download
Page 825 of 1563
TM 9-2815-220-24 FLYWHEEL AND SPUR GEAR REPLACEMENT (2CA, 2DA) 0102 00 INSTALLATION (Continued) NOTE Eye bolt must be removed from flywheel before flywheel is drawn tight against flange on crankshaft to permit flywheel to clear transmission adapter lifting eye. 2. Install flywheel (2) (Continued). c. Position aligned flywheel (2) against flange on crankshaft (9) and temporarily install three equally spaced mounting screws (4). d. Alternately tighten screws (4) to draw flywheel (2) toward flange on crankshaft (9) while watching that eyebolt (6) does not contact transmission adapter (10). e. When eyebolt (6) is near transmission adapter (10), disconnect lifting device (7) and remove eyebolt. f. Continue to tighten mounting screws (4) until flywheel is tight against crankshaft (9) flange, and then remove screws (4). 2 9 7 6 2 4 10 WP 0102 00-5