TM-9-2815-220-24 Maintenance Manual for AVDS-1790-2CA AVDS-1790-DA and AVDS-1790-2DR Engines Download
Page 824 of 1563
TM 9-2815-220-24 FLYWHEEL AND SPUR GEAR REPLACEMENT (2CA, 2DA) 0102 00 CLEANING 1. See Work Package 0028 for General Cleaning Procedures. INSPECTION All parts must be inspected with care. Replace parts if damage or wear exceeds allowable limits. 1. See Work Package 0028 for General Inspection Procedures. INSTALLATION 1. Install eyebolt (6) (item 65, WP 0176) in threaded hole of flywheel (2). WARNING Flywheel is heavy. Be sure that lifting device is attached and do not allow flywheel to swing about uncontrolled. Failure to comply may result in personal injury. 8 2 6 7 2. Install flywheel (2). a. Attach a suitable lifting device (7) and align dowel pin holes in flywheel (2) with dowel pins (8) in crankshaft. b. Rotate crankshaft as necessary to align dowel pins (8) with holes in flywheel (2). WP 0102 00-4