TM-9-2815-220-24 Maintenance Manual for AVDS-1790-2CA AVDS-1790-DA and AVDS-1790-2DR Engines Download
Page 820 of 1563
TM 9-2815-220-24 TRANSMISSION SPACER RING ADAPTER REPLACE/REPAIR (2DR) 0101 00 CLEANING 1. See Work Package 0028 for General Cleaning Procedures. INSPECTION All parts must be inspected with care. Replace parts if damage or wear exceeds allowable limits. 1. See Work Package 0028 for General Inspection Procedures. REPAIR 1. Replace damaged, bent, or stripped studs (8). Refer to Work Package 0028 for procedures and to the following table for stud size and setting height. Location Setting Height Quantity Required Stud Size and Length 8 1-5/16 24 1/2-13 (3/4) X 1/2-20 (13/16) X 1-5/16 INSTALLATION 1. Apply Lubriplate (item 23, WP 0173) to new O-ring (7) (item 319, WP 0175) and install on spacer (1). 2. Place spacer (1) into position and secure using 17 screws (2) with new lock washers (3) (item 95, WP 0175). 3. Install two screws (4) and secure with new self-locking nuts (5) (item 28, WP 0175). 4. Torque 19 screws (2, 4) to 23-27 foot-pounds (31-37 N•m). 6 8 5 4 7 2 3 1 END OF WORK PACKAGE WP 0101 00-2