TM-9-2815-220-24 Maintenance Manual for AVDS-1790-2CA AVDS-1790-DA and AVDS-1790-2DR Engines Download
Page 810 of 1563
TM 9-2815-220-24 TURBOSUPERCHARGER ASSEMBLY REPLACEMENT (2DR) 100 00 REMOVAL (Continued) CAUTION EARLY MODEL CONFIGURATION Early models may have a two-piece hose connection between the air outlet elbow and intake manifold. If your engine the two- piece hose connection, you should replace the existing (two hose and intermediate pipe) set-up with the one-piece hose (part number (11682625 ). Failure to comply may lead to premature engine f ailure due to dust ingestion. 3. Remove air outlet elbow (12). a. Loosen self-locking nuts on hose clamps (13). b. Remove six self-locking nuts (14) and remove air outlet elbow (12) with gasket (15) (not shown). c. Discard air outlet elbow gasket (15) and self-locking nuts. 4. Remove turbosupercharger (16) mounting nuts (17). a. Remove two self-locking nuts (17) with flat washers (18) at turbosupercharger mounting base (19). Discard self-locking nuts. 15 19 17, 18 (two places) 12 14 (six places) 16 13 (two places) WP 0100 00-4