TM-9-2815-220-24 Maintenance Manual for AVDS-1790-2CA AVDS-1790-DA and AVDS-1790-2DR Engines Download
Page 743 of 1563
TM 9-2815-220-24 SENDING UNITS AND SWITCH REPLACEMENT (2DR) 0093 00 CLEANING 1. See Work Package 0028 for Standard Cleaning Procedures. INSPECTION All parts must be inspected with care. Replace part if damage or wear exceeds allowable limits. 1. See Work Package 0028 for Standard Inspection Procedures. INSTALLATION NOTE Use thread sealing (item 41, WP 0173) product on all threaded connections. Adjoining threaded connections that might be disturbed during the disassembly process should be removed, cleaned and resealed during reassembly. 1. Install switches (9, 10, 11) at vibration damper housing (12). a. If removed, install pipe reducer (13) into damper housing (12). b. Install engine oil temperature sending unit (9) into pipe reducer (13). c. If removed, install pipe reducer (14) into damper housing (12). d. Install engine oil high temperature switch (10) into bushing (14). e. Install engine oil low pressure switch (11) into pipe reducer (15). 13 11 10 12 14 9 15 WP 0093 00-3