TM-9-2815-220-24 Maintenance Manual for AVDS-1790-2CA AVDS-1790-DA and AVDS-1790-2DR Engines Download
Page 699 of 1563
TM 9-2815-220-24 PRIMARY FUEL FILTER REPAIR/ELEMENT REPLACEMENT 0086 00 ASSEMBLY 1. Install helical spring (15), element retainer (14), new O-ring (13) (item 4, WP 0175) and new filter element (12) (item 217, WP 0175) inside filter body (1). NOTE Do not tighten self-locking nut on filter cover screw. It should be just snug enough to hold screw yet still allow screw to turn to secure cover. Use thread sealing tape (item 41, WP 0173) on all threaded fittings except filter cover screw. 2. Install bleeder valve (3), new gasket (18) (item 199, WP 0175), flat washer (17), screw (9) and new self-locking nut (16) (item 112, WP 0175) to filter cover (10). 3. Install filter cover (10) using a new gasket (11) (item 198, WP 0175). a. Torque screw (9) to 85-95 inch-pounds (9.7-10.7 N•m). 5. Install elbow (19), connector (20), and fluid filter fitting (21) on filter body (1). 3 9 1 20 1 1 1 1 10 11 1 21 17 18 6 2 3 4 5 19 WP 0086 00-5