TM-9-2815-220-24 Maintenance Manual for AVDS-1790-2CA AVDS-1790-DA and AVDS-1790-2DR Engines Download
Page 694 of 1563
TM 9-2815-220-24 FUEL/WATER SEPARATOR REPAIR/FILTER ELEMENT REPLACEMENT 0085 00 INSTALLATION (Continued) 3. Install drain elbow (10) and hose (9). NOTE Fuel out fitting is a tee on engines equipped with a smoke generating system. On engines without a smoke generating system the fuel out fitting is a 90-degree elbow. The tee fitting configuration is illustrated. 4. Install tee fitting (8). 5. Install hose (7) (fuel out to fuel injection pump). 6. Install hose (6) (fuel out to smoke system). 7. Install inlet elbow (5). 8. Install hose (3) (fuel into water separator). 9. Bleed air from filter and fuel lines by opening bleeder valve (2) and running electric fuel pump (see appropriate vehicle operators manual) until fuel runs out of bleeder valve (2). 3 END OF WORK PACKAGE 7 9 8 6 5 10 4 WP 0085 00-8