TM-9-2815-220-24 Maintenance Manual for AVDS-1790-2CA AVDS-1790-DA and AVDS-1790-2DR Engines Download

Page 693 of 1563

TM 9-2815-220-24 FUEL/WATER SEPARATOR REPAIR/FILTER ELEMENT REPLACEMENT 0085 00 INSTALLATION 1. Install water separator (4). a. Place separator in position and loosely secure using three mounting screws (13, 17) with flat washers (15) and new lock washers (14) (item 93, WP 0175), leaving space between water separator (4) and mounting bracket (18). CAUTION Probes must be installed in proper separator ports. Probe with lead attached to side of control module must be installed in upper separator port. Failure to comply will result in improper functioning of fuel/water separator. 2. Install two water level probes (11, 12). a. Install two water level probes (11, 12) in fuel water separator (4). b. Install screw (13), new lock washer (14) (item 93, WP 0175), flat washer (15), and cushioned clamp (16). c. Tighten remaining mounting screws (13, 17). 18 12 11 16 14 17 17 4 4 13 Control Module Lower Probe Upper Probe 13 15 WP 0085 00-7