TM-9-2815-220-24 Maintenance Manual for AVDS-1790-2CA AVDS-1790-DA and AVDS-1790-2DR Engines Download
Page 686 of 1563
TM 9-2815-220-24 FUEL/WATER SEPARATOR AUTOMATIC DRAIN SYSTEM AND WIRING HARNESS REPLACEMENT 0084 00 INSTALLATION (Continued) 5. Install drain elbow (10) and hose (9). NOTE Fuel out fitting is a tee on engines equipped with a smoke generating system. On engines without a smoke generating system the fuel out fitting is a 90-degree elbow. The tee fitting configuration is illustrated. 6. Install tee fitting (8). 7. Install hose (7) (fuel out to fuel injection pump). 8. Install hose (6) (fuel out to smoke system). 9. Install inlet elbow (5). 10. Install hose (3) (fuel into water separator). 11. Bleed air from filter and fuel lines by opening bleeder valve (2) and running electric fuel pump (see appropriate vehicle operators manual) until fuel runs out of bleeder valve (2). 3 END OF WORK PACKAGE 7 9 8 6 5 10 4 WP 0084 00-10