TM-9-2815-220-24 Maintenance Manual for AVDS-1790-2CA AVDS-1790-DA and AVDS-1790-2DR Engines Download
Page 681 of 1563
TM 9-2815-220-24 FUEL/WATER SEPARATOR AUTOMATIC DRAIN SYSTEM AND WIRING HARNESS REPLACEMENT 0084 00 REMOVAL (Continued) CAUTION Do not attempt to remove probes from control module. They are permanently affixed, removal will destroy the module. 11. Remove control module (19). a. Disconnect wiring harness electrical lead (20) at module (19) b. Disconnect electrical lead (21) from control module and at solenoid valve (22). c. Remove two assembled washer screws (23) and cushioned clamps (24) securing probe (11, 12) leads. d. Remove one screw (25) with flat washer (26) and cushioned clamp (27). e. Remove three screws (25) with flat washers (26) and remove control module (19). Lower Probe Upper Probe 27 26 25 24 19 22 20 21 11 12 23 WP 0084 00-5