TM-9-2815-220-24 Maintenance Manual for AVDS-1790-2CA AVDS-1790-DA and AVDS-1790-2DR Engines Download

Page 680 of 1563

TM 9-2815-220-24 FUEL/WATER SEPARATOR AUTOMATIC DRAIN SYSTEM AND WIRING HARNESS REPLACEMENT 0084 00 REMOVAL (Continued) CAUTION Do not attempt to remove probes from control module. They are permanently affixed, removal will destroy the module. 9. Remove two water level probes (11, 12). a. Remove screw (13), with lock washer (14) and flat washer (15) to remove cushioned clamp (16). Discard lock washer. b. Loosen, but do not remove remaining mounting screws (13, 17). c. Pull fuel water separator (4) away from mounting bracket (18). d. Mark probes for location, then remove two water level probes (11, 12) from fuel water separator (4). 10. Remove water separator (4). a. Remove mounting screws (13, 17) to remove separator. 18 12 11 16 14 4 17 4 13 17 13 15 WP 0084 00-4