TM-9-2815-220-24 Maintenance Manual for AVDS-1790-2CA AVDS-1790-DA and AVDS-1790-2DR Engines Download
Page 614 of 1563
TM 9-2815-220-24 CYLINDER OIL DRAIN TUBES REPLACEMENT 0077 00 INSTALLATION (Continued) 3. Install [left bank damper end] oil drain tube (37). a. Position clamp (40) onto tube (37) far enough towards flange end to be out of the way. b. Install new lubricated hose (41) (item 313, WP 0175) half way onto tube and secure with clamp (40). c. Place a clamp (40) on tube (50) and push hose (41) with tube (37) onto tube (50). d. Install tube (37) to oil pan, using a new gasket (42) (item 159, WP 0175). e. Secure tube (37) to oil pan using two screws (38) with new lock washers (39) (item 93, WP 0175) and at opposite end to tube (50) with clamp (40). 4. Assemble tube (34) to tube (26). a. Position clamps (31) over ends of tubes (34, 26) and slide clamps out of the way. b. Using new, lubricated hose (32) (item 313, WP 0175) (using lubricating oil, item 21, WP 0173), push ends of tubes (34, 26) half way into hose. Do not secure hose (32) with clamps yet. c. Push new, lubricated, hose (30) (item 313, WP 0175) half way onto tube (26) and secure with clamp (29). d. Push new lubricated hose (36) (item 313, WP 0175) onto end of tube (34) and secure with clamp (35). 50 37 33 38 39 42 40 41 40 DAMPER END FLYWHEEL END 31 32 31 35 36 35 30 29 29 26 28 27 34 LEFT BANK OIL DRAIN WP 0077 00-8