TM-9-2815-220-24 Maintenance Manual for AVDS-1790-2CA AVDS-1790-DA and AVDS-1790-2DR Engines Download
Page 605 of 1563
TM 9-2815-220-24 OIL LEVEL GAUGE ROD REPLACEMENT/REPAIR 0076 00 ASSEMBLY (Continued) 1 14 15 17 16 13 4. Install oil level indicator tube neck (13). a. Position new gasket (16) (item 192, WP 0175) on neck (13). b. Insert neck (13) through cover (1) and secure with two cap screws (14) using two new lock washers (15) (item 93, WP 0175). c. Using Lubriplate (item 23, WP 0173), lubricate and install two new O-rings (17) (item 149, WP 0175) on neck (13). INSTALLATION NOTE Engine models 2CA and 2DA locate the oil level tube between cylinders 1 and 2 left side. Engine model 2DR locates the oil level tube between cylinders 2 and 3 left side. Removal/installation procedures are identical. 1. Install oil level indicator tube (5). a. Position new gasket (12) (item 288, WP 0175). b. Install oil level indicator tube (5). c. Secure with three new self-locking nuts (11) (item 33, WP 0175). d. Install air baffles (8, 9). e. Secure with four cap screws (6) using new lock washers (7) (item 85, WP 0175). f. Connect fuel return hose (10). 8 10 9 (four places) 6, 7 5 12 11 5 WP 0076 00-5