TM-9-2815-220-24 Maintenance Manual for AVDS-1790-2CA AVDS-1790-DA and AVDS-1790-2DR Engines Download

Page 604 of 1563

TM 9-2815-220-24 OIL LEVEL GAUGE ROD REPLACEMENT/REPAIR 0076 00 DISASSEMBLY 1. Remove oil level indicator tube neck (13). 14 15 16 17 20 20 18 19 13 21 a. Remove two cap screws (14) with lock washers (15). Discard lock washers. b. Remove and discard gasket (16) and two O-rings (17). 2. Remove spring (18). 3. Remove and discard preformed packing (19). NOTE Do not remove two cap screws (20) fastening cap (21) to neck (13) unless inspection indicates replacement is necessary. The screws are staked in place. 3. If necessary, remove two cap screws (20). CLEANING 1. See Work Package 0028 for Standard Cleaning Procedures. INSPECTION All parts must be inspected with care. Replace parts if damage or wear exceeds allowable limits. 1. See Work Package 0028 for Standard Inspection Procedures. ASSEMBLY 1. Install new preformed packing (19) (item 285, WP 0175) in cap (21). 2. Assemble cap (21) to neck (13). a. Position cap (21) over tabs on neck (13) and secure with two screws (20). b. Snug-tighten two screws (20) so that cap (21) can open and close freely. c. Stake two screws (20) in place. 3. Install spring (18). WP 0076 00-4