TM-9-2815-220-24 Maintenance Manual for AVDS-1790-2CA AVDS-1790-DA and AVDS-1790-2DR Engines Download
Page 599 of 1563
TM 9-2815-220-24 OIL FILL TUBE REPLACE/REPAIR 0075 00 DISASSEMBLY 1. Remove spring (10). 2. Remove and discard preformed packing (11) from cap (12). 12 13 9 13 10 11 NOTE Do not remove two cap screws (13) fastening cap (12) to tube (9) unless inspection indicates replacement is necessary. The screws are staked in place. 3. If necessary, remove two cap screws (13). CLEANING 1. See Work Package 0028 for Standard Cleaning Procedures. INSPECTION All parts must be inspected with care. Replace parts if damage or wear exceeds allowable limits. 1. See Work Package 0028 for Standard Inspection Procedures. ASSEMBLY 1. Install new preformed packing (11) (item 285, WP 0175) in cap (12). 2. Assemble cap (12) to tube (9). a. Position cap (12) over tabs on tube (9) and secure with two screws (13). b. Snug-tighten two screws (13) so that cap (12) can open and close freely. c. Stake screws (13) in place. 3. Install spring (10). WP 0075 00-3