TM-9-2815-220-24 Maintenance Manual for AVDS-1790-2CA AVDS-1790-DA and AVDS-1790-2DR Engines Download
Page 591 of 1563
TM 9-2815-220-24 OIL FILTERS REPLACEMENT 0073 00 INSTALLATION (Continued) 3. Install oil vent cap screw (1). 5 4 1,2,3 a. Apply lubricant (item 21, WP 0173) to threads of cap screw (1) and install with flat washer (2) and new seal washer (3) (item 158, WP 0175). b. Torque-tighten vent cap screw (1) to 125-150 inch-pounds (14-17 N•m) using torque wrench (item 124, WP 0176). CAUTION Failure to properly tighten drain valve can result in damage to engine. Valve must not be over tightened, nor under tightened. 4. Apply lubricant to threads of drain plug (4) and torque-tighten to 150 inch-pounds (17 N•m) using torque wrench (item 124, WP 0176). END OF WORK PACKAGE WP 0073 00-3 (4 blank)