TM-9-2815-220-24 Maintenance Manual for AVDS-1790-2CA AVDS-1790-DA and AVDS-1790-2DR Engines Download

Page 589 of 1563

TM 9-2815-220-24 OIL FILTERS REPLACEMENT 0073 00 THIS WORK PACKAGE COVERS: Removal, Cleaning, Installation INITIAL SETUP: Tools: General mechanic’s tool kit (item 121, WP 0176) Jackscrews (2) (item 71, WP 0176) Torque wrench, 0-300 inch-pounds (item 124, WP 0176) Suitable container (1-gallon (4-liter) minimum) Mandatory Replacement Parts: Gasket (item 240, WP 0175) Oil filter element (2) (item 218, WP 0175) Seal washer (item 158, WP 0175) Self-locking nut (10) (item 113, WP 0175) Expendable Materials: Cleaning cloth (item 10, WP 0173) Lubricating oil (item 21, WP 0173) Personnel Required: Track Vehicle Repairer (2) 63H10 Equipment Condition: Engine removed from vehicle and placed on a flat stationary surface 4 5 1,2,3 REMOVAL 1. Drain oil filter housing and oil coolers. a. Remove oil vent cap screw (1) with flat washer (2) and seal washer (3). Discard seal washer. b. Loosen oil drain valve (4) six complete turns to allow drainage into oil pan. Do not loosen oil drain valve adapter (5). 9 8 9 6 2. Remove cover (6). a. Remove ten self-locking nuts (7) with flat washers (8) to remove cover (6). Discard nuts (7). 7 b. Insert two 3/8-24 jackscrews (9) (item 71, WP 0176) in threaded puller holes and tighten alternately to remove cover (6). c. Remove jackscrews (9). WP 0073 00-1