TM-9-2815-220-24 Maintenance Manual for AVDS-1790-2CA AVDS-1790-DA and AVDS-1790-2DR Engines Download
Page 560 of 1563
TM 9-2815-220-24 SMOKE GENERATOR WIRING HARNESSES (2DR) REPLACEMENT (PN 12354467, 11672386) 0068 00 REMOVAL (Continued) 2. Remove single solenoid smoke generator wiring harness (9) (continued). e. Remove screws (18), lock washers (19), and loop clamps (20) retaining smoke generator harness (9) along generator side of engine. Discard lock washers. f. Cut and remove tie wraps (21). g. Disconnect electrical plug connector at T connection (22) of starter ground circuit. 18, 19, 20 (three places) 21 (Various places along harness) 22 9 CLEANING 1. See Work Package 0028 for Standard Cleaning Procedures. INSPECTION All parts must be inspected with care. Replace part if damage or wear exceeds allowable limits. 1. See Work Package 0028 for Standard Inspection Procedures. REPAIR 1. See Work Package 0056 for Wiring Harness Cable and Repair. WP 0068 00-4