TM-9-2815-220-24 Maintenance Manual for AVDS-1790-2CA AVDS-1790-DA and AVDS-1790-2DR Engines Download
Page 433 of 1563
TM 9-2815-220-24 SIGNAL WIRING HARNESS REPLACEMENT (2DA) (PN 12254376, 12354385) 0058 00 INSTALLATION (Continued). 10. Install harness (43) at front of engine (continued). NOTE Damper housing mounted hour meter harness installation instructions are covered in step 10,d. Later engines have top-mounted hour meters positioned next to the generator and signal harness main connector (harness 12354385). See step 11 for top-mounted harness installation instructions. d. Install loop clamps (46) onto harness angle brackets (103) using screws (47) with nut (48), and new lock washers (49) (item 92, WP 0175). e. Install electrical connectors at hour meter (54), engine oil temperature transmitter (55) engine oil pressure transmitter (56), low engine oil pressure switch (57), and high oil temperature switch (58). f. Install new self-locking nut (51) (item 33, WP 0175) with flat washer (52) to retain loop clamp (53). g. Install loop clamps (46) onto harness and secure using screws (44) with new lock washers (45) (item 92, WP 0175). WP 0058 00-25 50 47, 48, 49 103 46 46 43 57 58 51, 52, 53 56 55 54 44, 45