Covering the politics, Business and technology of defense - Subscribe Today

TM-9-2815-220-24 Maintenance Manual for AVDS-1790-2CA AVDS-1790-DA and AVDS-1790-2DR Engines Download

Page 421 of 1563

TM 9-2815-220-24 SIGNAL WIRING HARNESS REPLACEMENT (2DA) (PN 12254376, 12354385) 0058 00 REMOVAL (Continued) 19. Remove harness to crankcase-mounted (near starter) low voltage protection module (LVPM). NOTE The low voltage protection module mounted near the starter is not the current configuration of the 2CA engine, and is not supported by the repair parts manual. If your engine has the low voltage protection module mounted near the starter, low voltage protection module kit, 12254381, should be installed to reposition the module to the top of the engine. a. Disconnect wiring connector (84) at low voltage protection module (83). b. Remove nut (91), and lock washer (92), cut tie wraps (97) as necessary, and remove LVPM lead (93). Reinstall nut (90) and lock washer (92) for later use. c. Remove machine screw (94) with lock washer (95). Remove LVPM lead (96). Reinstall screw and lock washer for safe keeping. 91, 92 96 83 94, 95 84 93 97 WP 0058 00-13