TM-9-2815-220-24 Maintenance Manual for AVDS-1790-2CA AVDS-1790-DA and AVDS-1790-2DR Engines Download

Page 404 of 1563

TM 9-2815-220-24 SIGNAL WIRING HARNESS REPLACEMENT (2CA) (PN 12254376, 12354385) 0057 00 INSTALLATION (Continued) 8. Install harness (26) at front of engine (continued). NOTE Damper housing mounted hour meter harness installation instructions are covered in step 8, i. Later engines have top-mounted hour meters positioned next to the generator and signal harness main connector (harness 12354385). See step 9 for top-mounted harness installation instructions. i. Install loop clamps (29) onto harness angle brackets (85) using screws (30) with nut (31), and new lock washers (32) (item 92, WP 0175). j. Connect electrical connectors at hour meter (37), engine oil temperature transmitter (38) engine oil pressure transmitter (39), low engine oil pressure switch (40), and high oil temperature switch (41). k. Install new self-locking nut (34) (item 33, WP 0175) with flat washer (35) to retain loop clamp (36). m. Install loop clamps (29) onto harness. Install screws (27) with new lock washers (28) (item 92, WP 0175). WP 0057 00-24 26 34, 35, 36 39 38 37 27 28 40 29 41 33 30, 31, 32 85 29