TM-9-2815-220-24 Maintenance Manual for AVDS-1790-2CA AVDS-1790-DA and AVDS-1790-2DR Engines Download
Page 374 of 1563
TM 9-2815-220-24 WIRING HARNESS AND CABLE REPAIR 0056 00 REPLACEMENT OF CONNECTORS (Continued) Disassembly of Terminal Type Cable Connectors 1. Cut and discard terminal (A). Assembly of Terminal Type Cable Connectors 1. Strip cable (B) insulation equal to depth of terminal well. C B A 2. Slide insulator (C) over cable (B). 3. Insert cable (C) into terminal (A) well and crimp. 4. Slide insulator (C) over crimped end of terminal (A). Disassembly of Female Cable Connector with Washer 1. Cut and discard terminal (A). Assembly of Female Cable Connector with Washer 1. Strip cable (B) insulation approximately 1/8 inch (3.2 mm). A D C B 2. Slide shell (C) and washer (D) over cable (B). 3. Place cable (B) in cylinder end of terminal (A). 4. Slide shell (C) and washer (D) over terminal (A). Disassembly of Male Cable Connector with Washer 1. Cut and discard terminal (A). Assembly of Male Cable Connector with Washer 1. Strip cable (B) insulation equal to depth of terminal (A) well. A C B D 2. Slide shell (C) over cable (B). 3. Insert cable (B) into terminal (A) well and crimp. 4. Place C-washer (D) over cable (B) at crimped junction and slide shell (C) over C-washer (D) and terminal (A). WP 0056 00-14