TM-9-2815-220-24 Maintenance Manual for AVDS-1790-2CA AVDS-1790-DA and AVDS-1790-2DR Engines Download
Page 37 of 1563
TM 9-2815-220-24 GENERAL INFORMATION (Continued) 0001 00 WP 0001 00-3 PREPARATION FOR STORAGE OR SHIPMENT Refer to Work Package 0098, Engine and Container Replacement, for instructions on preparation for storage and shipment. ADMINISTRATIVE STORAGE See AR 750-1 for the requirements for administrative storage of Army materiel. NOMENCLATURE CROSS – REFERENCE LIST In general, nomenclature used in this manual is in accordance with the terms used for provisioning as they appear in the Repair Parts and Special Tools List (RPSTL). A few tools, parts, and components are, however, referred to by names more common than those in the RPSTL. NOMENCLATURE COMMON NAME Cable assembly Wiring harness or lead assembly Gauge rod Dipstick Hand hammer Plastic-faced hammer Hinged handle Breaker bar Insert wrench Drive wrench Key, woodruff key, machine key Key Metal seal ring Shaft seal Retaining ring Snap ring Safety glasses Goggles Safety wire Lock wire Screw-thread inserter Drive wrench Screw-thread remover Removal tool Shipping/storage container Container Socket head screw key Hex key Spring resiliency tester Spring scale Threaded insert remover Removal tool Transmitter Sending unit Wire rope Cable LIST OF ABBREVIATIONS A list of common abbreviations including symbols and a glossary are included in Work Package 00179. QUALITY OF MATERIAL Material used for replacement, repair, or modification must meet the requirements of this manual. If quality of material requirements is not stated in this manual, the material must meet the