TM-9-2815-220-24 Maintenance Manual for AVDS-1790-2CA AVDS-1790-DA and AVDS-1790-2DR Engines Download
Page 31 of 1563
TM 9-2815-220-24 HOW TO USE THIS MANUAL HOW TO USE WORK PACKAGES (Continued) All Work Packages (Continued) 3. Use the RPSTL (TM 9-2815-220-24P) to order parts used in the work packages. The RPSTL gives the required National Stock Number (NSN), in addition to the Source, Maintenance, and Recoverability (SMR) code that indicates the manner of acquiring support items for maintenance, repair, or overhaul of end items. To use the RPSTL to identify and order a part, do the following: a. In this manual, turn to the first page of the work package to be performed. b. Find “Mandatory Replacement Parts” under INITIAL SETUP, and read the part(s) that are listed. If any part is listed, it will be illustrated in the work package steps and must be replaced when the work package is performed. Next, determine if any other parts are damaged and need to be replaced in the work package. c. Go to the RPSTL and find the same illustrated part. That part will have an item number assigned to it. Look up the item number in the listing for that figure. Look up the SMR (source, maintenance, recoverability) code for the item that must be replaced. The SMR code specifies the level of maintenance authorized to perform repair of that item. d. If the SMR code authorizes you to repair the item, look for the item NSN in the National Stock Number Cross-Reference Index. Use the item NSN to order a new replacement part. Remember Pay attention to all warnings, cautions, and notes within the work packages. Ignoring a warning could cause death or injury to personnel. Ignoring a caution could cause damage to equipment. Notes contain facts to make the maintenance easier. Both warnings and cautions always appear just above the step to which they apply. xiii (iv blank)