TM-9-2815-220-24 Maintenance Manual for AVDS-1790-2CA AVDS-1790-DA and AVDS-1790-2DR Engines Download
Page 281 of 1563
TM 9-2815-220-24 FUEL/WATER SEPARATOR OPERATION TESTS 0042 00 WP 0042 00-11 (12 blank) AFTER TESTS (Continued) 7. Replace filters (items 195 and 196, WP 0175) and bleed system according to procedures in "Fuel/Water Separator Filters Repair/Replace Elements," WP 0085. 8. Install cover (8). a. Remove and discard O-ring (26). b. Assure that mounting surfaces are clean and new O-ring (26) (item 197, WP 0175) is in place. c. Secure cover (8) using eight screws (9) with new lock washers (10) (item 92, WP 0175) and flat washers (11). 8. Install fuel/water separator (1) to mounting bracket (2). a. Place sensor wires (7) through clamp (6). b. Position fuel/water separator in place against bracket (2) and move sensor wires (7) in place for mounting bolt (3). c. Secure fuel/water separator (1) and sensor wires (7) using four screws (3), with new lock washers (4) (item 93, WP 0175) and flat washers (5). END OF WORK PACKAGE 8 9 10 11 26 3 1 4 5 2 6 7