TM-9-2815-220-24 Maintenance Manual for AVDS-1790-2CA AVDS-1790-DA and AVDS-1790-2DR Engines Download
Page 264 of 1563
TM 9-2815-220-24 GENERATOR (650 AMPERE) DRIVE GEAR TEST 0039 00 TEST METHOD TWO: BENCH TEST (Continued) PREPARATION (Continued) 14 8 3. Remove generator drive gear assembly (14) from generator drive adapter (8). 4. Secure generator holding fixture (15) to workbench and remove coupling clamp (16). 5. Remove adapter (17) with plate (18) as an assembly from fixture (15) base by removing two plain nuts (19) with lock washers (20). 6. Place drive gear assembly (14) in fixture (15) base assuring that gear teeth (A) of coupling tool (1) (item 58, WP 0176) are meshed with teeth (B) in the base of fixture (15) (item 59, WP 0176). 7. Secure adapter (17) and attached plate (18) to fixture (15) base using two plain nuts (19) with lock washers (20). 8. Install splined end of generator coupling tool (1) into drive gear (14) and secure to fixture (15) with coupling clamp (16). 17 18 A 19 20 15 16 B 14 1 WP 0039 00-4