TM-9-2815-220-24 Maintenance Manual for AVDS-1790-2CA AVDS-1790-DA and AVDS-1790-2DR Engines Download
Page 243 of 1563
TM 9-2815-220-24 INTAKE AND EXHAUST VALVE TIMING PROCEDURE 0035 00 INSTALLATION (Continued) 5. Adjust intake valve (8) clearance (0.010 inch, 0.254 mm). a. Loosen intake valve adjusting screw lock nut (10). b. Turn valve adjusting screw (11) until clearance between valve adjusting screw pad (12) and valve stem is 0.010 inch using thickness gauge blade (13) (item 55, WP 0176). Gauge blade must move through clearance with a slight drag. c. Check position of valve adjusting screw pad (12) to make sure seat is flat on valve stem. d. Torque lock nut (10) to 200-225 inch-pounds (23-25 N•m) after correct adjustment is made. Make certain setting has not changed after tightening lock nut (10). 8 13 12 10 11 6. Install intake valve adjustment cover (3). a. Using new gasket (6) (item 350, WP 0175), install cover (3). b. Secure with two bolts (4) and flat washers (5). 7. Install timing access cover (1). a. Secure with three cap screws (2). 2 (3 places) 1 2 1 END OF WORK PACKAGE WP 0035 00-13 (14 blank)