TM-9-2815-220-24 Maintenance Manual for AVDS-1790-2CA AVDS-1790-DA and AVDS-1790-2DR Engines Download
Page 209 of 1563
TM 9-2815-220-24 THREADED INSERT REPLACEMENT 0030 00 INSTALLATION (Continued) 8. Put new oversize or standard insert (1) on drive wrench (3). 3 9. Install new oversize or standard insert (1). a. Coat outside threads of insert (1) with sealant compound (item 30, WP 0173). b. Using ratchet handle and drive wrench (3), screw insert (1) into threaded hole (A) in component (8). 1 10. Prepare oversize or standard insert swage tool (14) (item 122, WP 0176). a. Determine proper insert swage tool (14) and swage tool stop (15) depth. 3 b. Install swage tool stop (15) on swage tool (14). 1 A 11. Lock insert (1) in place. a. Put swage tool (14) into insert (1). b. Using hammer, strike top of swage tool (14) until swage tool stop (15) bottoms on component (8). Remove tool. 14 15 c. Inspect new insert (1) for damage during installation. If damaged, go to Removal, step 1. 12. Clean all new inserts and related components. 14 15 a. Clean assembly and hardware (WP 0028). 1 8 END OF WORK PACKAGE WP 0030 00-5 (6 blank)