TM-9-2815-220-24 Maintenance Manual for AVDS-1790-2CA AVDS-1790-DA and AVDS-1790-2DR Engines Download
Page 208 of 1563
TM 9-2815-220-24 THREADED INSERT REPLACEMENT 0030 00 INSTALLATION 1. Put new lock-ring insert (4) on drive wrench (12). 2. Install lock-ring insert (4). a. Coat outside threads of insert (4) with sealant compound (item 30, WP 0173). 12 b. Using drive wrench (12), screw insert (4) into component (8) threads. 3. Position new lock-ring (6) on insert (4). a. Align serrations of insert (4) with serrations of lock-ring (6). 4 CAUTION Do not allow drive tool to contact component. Any impact of pressure on component surface may damage component threads. Damage to equipment can occur. 8 4. Install new lock-ring (6). 6 a. Position drive tool (13) in lock- ring (6) on insert (4). b. Using hammer, strike top of drive tool (13) until lock-ring (6) is in position. 4 5. Inspect new lock-ring (6) for damage. 13 a. If lock-ring (6) is not in position or is damaged, go to Removal, step 4. 6 6. Clean new lock-ring (6), insert (4), and related component. 4 7. Go to End of Work Package. WP 0030 00-4