TM-9-2815-220-24 Maintenance Manual for AVDS-1790-2CA AVDS-1790-DA and AVDS-1790-2DR Engines Download
Page 180 of 1563
TM 9-2815-220-24 SERVICE UPON RECEIPT 0027 00 OPERATIONAL PROCEDURES Initial Starting and Break-in NOTE Engine may contain preservative oil upon receipt. Preservative engine oils PE1 and PE2 are identical to engine oils OE-10 and OE-30 except that they contain a preservative additive. PE1 and PE2 will be used in the same manner as the regularly used engine oils OE-10 and OE-30 until the first semiannual oil change. Due to international processing, engine may be hard to start and may smoke and run rough. Let it run for 5 minutes and see if it improves. Perform troubleshooting procedures if engine fails to develop full power after 5 minutes. Start and run engine until preservative oil is out of combustion chambers and engine is operating smoothly. Check for fuel and oil leaks immediately. Operational Test Test engine systems for proper operation (refer to Work Package 0044). EQUIPMENT FAULTS Equipment faults disclosed during preliminary inspection and servicing or during break-in period will be corrected by the using unit or support maintenance. Serious equipment faults that appear to involve unsatisfactory design or material will be reported on SF 368, Quality Deficiency Report (Category II), as prescribed in DA PAM 738-750. END OF WORK PACKAGE WP 0027 00-2