TM-9-2815-220-24 Maintenance Manual for AVDS-1790-2CA AVDS-1790-DA and AVDS-1790-2DR Engines Download
Page 1542 of 1563
TM 9-2815-220-24 ABBREVIATIONS AND GLOSSARY 0179 00 GLOSSARY actuate To put into mechanical action or motion beveled Slanted braze Use of hard solders which have silver, copper or nickel as bases and have melting points above 800 °F burnish To rub or polish until smooth or glossy burr A thin ridge or area of roughness produced in cutting or shaping chase Re-align threads crocus A dark red ferric oxide used for polishing metals extruded Forced, pressed, or pushed out F.F.F.T. Flats From Finger Tight is a torque method used to tighten certain fittings, hose nuts, and tube nuts without having to use a torque wrench (described in WP 0174, Torque Limit Tables) ferrous Contains iron fillets A concave junction formed where two surfaces meet galled Worn away by friction hone Sharpen, enlarge, smooth out land An area of surface partly machined (as with grooves) that is left without such machining nonferrous Does not contain iron procedural work package The procedural work package is the part or component's "home" work package. A procedural work package may state "Go to Work Package 0028 for Standard Cleaning Procedures." That referenced work package of standard instructions may direct you to return to the "procedural work package" for detailed instructions or measurements. race A track or channel in which something rolls or slides, such as a groove for the balls in a bearing recess Indentation scored Grooved, scratched, notched seat To rest properly upon END OF WORK PACKAGE WP 0179 00-4