TM-9-2815-220-24 Maintenance Manual for AVDS-1790-2CA AVDS-1790-DA and AVDS-1790-2DR Engines Download
Page 1509 of 1563
TM 9-2815-220-24 ILLUSTRATED LIST OF FABRICATED ITEMS 0177 00 THIS WORK PACKAGE COVERS: Instructions on how to make items authorized to be fabricated at Direct Support and General Support maintenance. FABRICATED TOOLS AND EQUIPMENT The fabricated tools apply only to Direct Support and General Support. Principal dimensions are shown on the following illustrations to enable maintenance personnel to fabricate tools locally if desired. These tools are of value to maintenance organizations engaged in repairing engines; however, these fabricated tools are not available for issue. Item Description 1 Advance Unit Retaining Ring Compressor 2 Front Fan Drive Housing Lifting Tool 3 Engine Front Turning Tool (for Model AVDS-1790-2DR only) 4 Engine Flywheel Turning Tool (for Model AVDS-1790-2DR only) 5 Connecting Rod Bearing Replacement Tool Kit (4 pages) 6 Fuel Injection Pump Coupling Puller 7 Oil Pressure Regulating Valve Sleeve Puller 8 Fuel/Water Separator Test Harness 9 Fuel/Water Separator Jumper Wire 10 Turbosupercharger Covers (Used to cap turbosuperchargers for engine leak tests) 11 Oil Level Gauge Plug (Used to seal dipstick tube opening for engine leak test) 12 Modified Socket (Used to torque oil pump assembly cap) 13 Bending Tool (2 Required) (Used to bend fuel injection lines) 14 Air Valve Adapter 15 Fuel Coupling Grease Insert Adapter 16 Tapered Bolt, 9/16-18 x 4-1/2-inches (Damper removal) WP 0177 00-1