TM-9-2815-220-24 Maintenance Manual for AVDS-1790-2CA AVDS-1790-DA and AVDS-1790-2DR Engines Download
Page 1507 of 1563
TM 9-2815-220-24 TOOL IDENTIFICATION LIST 0176 00 (60) Valve Seat Grinding Kit, electric WGG90 TYPE1 Size1 4910-00-473-6437 (CTA 50-970) (72) * Valve Springs Lifter Assembly 8761535 5120-00-678-5285 (TM 9-2815-247-34P) Used with Stand- 8708419 for removing and installing valves and valve springs 132 Vise, Machinist’s 504M2 5120-00-293-1439 (SC 4910-95-CL-A31) 133 Washer, Flat NAS1149C 1290R 5310-00-167-0809 (TM 9-2350-292-24P) 134 Washer, Flat NAS620C41 6L 5310-00-764-9564 (TM 9-2350-292-24P) (104) Welding Equipment (Trailer mounted) 11022000 3431-01-090-1231 (SC 3431-95-A04) 135 * Wrench, Box and Open End Combination: Generator Mounting Nuts (Models 2DA and 2DR) 10935476 5120-00-789-4881 (TM 9-2815-220-24P) Removing and installing generator mounting nuts (32) * Wrench, Box: Torquing Cylinder Hold-Down Nuts, 1/2-inch drive, 5/8-inch double hex, 21-3/8 inch long 8761562 5120-00-475-5414 (TM 9-2815-220-24P) Torquing cylinder hold down nuts (113) * Wrench, Open End: Starter Mounting Nuts, 15/16 inch opening, offset handle, 10 inch long 8761568 5120-00-678-5288 (TM 9-2815-220-24P) Removing or installing starter mounting nuts 136 * Wrench, Splined: Engine Turning, 3/4-inch drive with external spline, 2-1/2 inch long (Models 2CA and 2DA) 10882747 5120-00-793-7895 (TM 9-2815-220-24P) Turning engine at transmission drive gear shaft (2CA, 2DA) (107) Wrench, Socket, 2 inch B107.1 CL1STA 5120-00-199-7770 (SC 4910-95-CL-A31) (123) Wrench, Torque, 0-150 inch-pounds TQ12B 5120-00-230-6380 (SC 4910-95-CL-A31) (124) Wrench, Torque, 0-300 inch-pounds B107.14M 5120-00-247-2536 (SC 4910-95-CL-A31) (125) Wrench, Torque, 200-1000 inch-pounds QD21000 Snap-on Tools (126) Wrench, Torque, 500-2500 inch-pounds QD3R2500 5120-01-355-1739 (127) Wrench, Torque, 0-175 foot-pounds B107.14M 5120-00-640-6364 (SC 4910-95-CL-A31) WP 0176 00-13