TM-9-2815-220-24 Maintenance Manual for AVDS-1790-2CA AVDS-1790-DA and AVDS-1790-2DR Engines Download

Page 1505 of 1563

TM 9-2815-220-24 TOOL IDENTIFICATION LIST 0176 00 (45) * Socket: Fuel Injection Nozzle Holder, 1-3/8 inch Hex socket, 3/4 inch square drive, 2 inch long 11610171 5120-00-875-9556 (CTA 50-970) Removing fuel Injection nozzle holders 107 Socket Wrench, 2 inch B107.1 CL1STA 5120-00-199-7770 (SC 4910-95-CL-A31) (3) Socket Wrench Adapter A-A-2172 5120-00-144-5207 (SC 4910-95-CL-A31) 108 Soldering Gun D-550-3 3439-00-618-6623 (SC 4910-95-A72) 109 * Spacer, Fan Rotor Hub Sleeve (Spacer): Leak Test 10882651 5365-00-795-7952 (TM 9-2815-247-34P) Retains fan clutch oil seal during fuel injection pump leak test 110 * Spreading Tool, Crankcase (Jack Screw): Bearing Cap Removing or Installing 8708361 5120-00-575-7767 (TM 9-2815-247-34P) Used with PULLER– 8708712 and ADAPTER–8375091 to remove main bearing caps 111 * Stand, Maintenance and Overhaul: Engine 10912260 4910-00-856-4137 (TM 9-2815-247-34P) 112 * Stand, Valve Removing and Inserting: Cylinder Valves 8708419 4910-00-554-1317 (TM 9-2815-247-34P) Cylinder stand for removing and installing valves, used with valve spring LIFTER– 8761535 113 * Starter Wrench, Open End: (Mounting Nuts) 15/16 inch opening, offset handle, 10 inch long 8761568 5120-00-678-5288 (TM 9-2815-220-24P) Removing or installing starter mounting nuts 114 * Stone and Holder Assembly: Cylinder hone composed of: 150 grain stone 180 grain stone 5704380 11662775-2 11662775-1 3460-00-689-3368 (TM 9-2815-220-24P) Honing cylinder bores 115 Stud Remover and Setter PD 5120-00- 288-6578 5120-00-288-6578 (SC 5180-90-CL-N05) 116 * Test Stand: Fuel Injection Advance Unit 10898928 4910-00-986-9873 (TM 9-2815-247-34P) Test fuel injection pump advance unit (46) Tester, Diesel Fuel Injection Nozzle 3YFL 4910-00-255-8641 (SC 4940-95-CL-B20) 117 Tester, Spring Resiliency (Fish Scale Type) DPP80 6635-00-918-2788 (SC 4910-95-CL-A02) 118 Tester, Spring Resiliency (Compression Type) SPT 6635-00-641-7346 (SC 4910-95-A63) WP 0176 00-11