TM-9-2815-220-24 Maintenance Manual for AVDS-1790-2CA AVDS-1790-DA and AVDS-1790-2DR Engines Download
Page 1504 of 1563
TM 9-2815-220-24 TOOL IDENTIFICATION LIST 0176 00 (79) Retaining Ring Pliers WT28163 5120-00-752-9755 (TM 9-2815-247-34P) (81) Retaining Ring Pliers (Set) 4440R 5120-00-789-0492 (SC 5180-95-CL-B08) (84) Riveter, Blind, Hand 98 5120-00-017-2849 (SC 3470-95-CL-A08) 101 Screw, Cap, Hexagon B1821BH07 5F400N 5305-00-903-7767 (CTA 50-970) 102 Screw, Cap, Hexagon B1821BH02 5F300N 5305-00-267-8962 (TM 9-2350-292-24P) 103 Screwdriver, Offset 138 5120-00-287-2130 (SC 4910-95-CL-A01) 104 Shop Equipment, Welding (Trailer mounted) 11022000 3431-01-090-1231 (SC 3431-95-A04) (26) * Sling, Crankshaft and Connecting Rod 10882958 4910-00-795-7955 (TM 9-2815-247-34P) Removing and installing engine crankshaft (37) * Sling, Engine Lifting, Beam-Type: Multiple Leg (Model 2DR) 11671664 3490-00-622-7288 (TM 9-2815-220-24P) (42) * Sling, Fan Drive and Advance Unit Housing : Removing or Installing 10882945 4910-00-795-7954 (TM 9-2815-247-34P) Removing and installing rear fan and advance unit housing 105 Sling, Four Leg 10952220 4910-00-919-2884 (CTA 50-970) (88) * Slide Hammer Mechanical Puller: 10 inch long with 1/2-20 UNF-2A Thread 8708712 5120-00-310-4668 (TM 9-2815-247-34P) Used with ADAPTER– 8375091 to remove starter and generator drive idler gear shaft and with SPREADING TOOL–8708361 to remove main bearing caps removing exhaust valve guides (38) * Sling, Multiple Leg: Engine Lifting (Models 2CA and 2DA) 12257229 4901-01-048-8706 (TM 9-2815-220-24P) (79) Snap Ring Pliers WT28163 5120-00-752-9755 (TM 9-2815-247-34P) (81) Snap Ring Pliers (Set) 4440R 5120-00-789-0492 (SC 5180-95-CL-B08) 106 * Socket: Final Filter Cap 12254213 5120-01-034-1698 (TM 9-2815-220-24P) Removing fuel injection pump final filter cap WP 0176 00-10