TM-9-2815-220-24 Maintenance Manual for AVDS-1790-2CA AVDS-1790-DA and AVDS-1790-2DR Engines Download
Page 1503 of 1563
TM 9-2815-220-24 TOOL IDENTIFICATION LIST 0176 00 90 * Puller, Mechanical: Threaded 5/16-18 UNC-2, 8-1/2 inch long, 2-3/4 inch Handle 5379997 5120-00-473-7222 (TM 9-2815-247-34P) Removing fan drive oil seal retainer, vibration damper, and crankshaft oil seal housing (2) * Puller Adapter, Mechanical: 1/2-20NF-2 to l/2-13NC x 1-7/8 inch long 8375091 5120-00-837-5091 (TM 9-2815-247-34P) Used with PULLER– 8708712 to remove starter and generator idler gear shaft and with SPREADING TOOL– 8708361 to remove main bearing caps 91 Punch, Drift, 5/16 B107.48 5120-00-240-8894 (CTA 50-970) 92 Reamer Set, Machine SC3455- 95CLA05 3455-00-449-7213 (SC 3470-95-CL-A15) 93 * Reamer, Hand: Finishing Exhaust Valve Stem Hole. Diameter tapers from 0.557 to 0.562 inch, 13-3/4 inch long 7083697 5110-00-708-3697 (TM 9-2815-247-34P) Used with BUSHING – 11642089 for finish reaming exhaust valve guide holes 94 * Reamer, Hand: Finishing Intake Valve Stem Hole. Diameter tapers from 0.495 to 0.500 inch, 13-3/4 inch long 7083699 5110-00-708-3699 (TM 9-2815-247-34P) Used with BUSHING – 11642088 for finish reaming intake valve guide hole 95 * Reamer, Hand: Roughing, Exhaust Valve Stem Hole. Diameter tapers from 0.550 to 0.560 inch, 13-3/4 inch long 7083696 5110-00-708-3696 (TM 9-2815-247-34P) Used with BUSHING – 11642089 for rough reaming exhaust valve guide hole 96 * Reamer, Hand: Roughing Intake Valve Stem Hole. Diameter tapers from 0.488 to 0.498-inch, 13-3/4 inch long 7083698 5110-00-708-3698 (TM 9-2815-247-34P) Used with BUSHING – 11642088 for rough reaming intake valve guide holes 97 Regulator Assembly (Air) 06A14A13L 1BB/P7816 42 4930-00-322-5911 (SC 4910-95-CL-A31) (78) * Remover and Replacer: Plier Type: Piston Rings 7950177 5120-00-494-1846 (TM 9-2815-247-34P) Removing and installing piston rings 98 Repair Tool, Pneumatic Tire Valve 2077 5120-00-308-3809 (SC 4910-95-CL-A72) 99 * Replacer, Valve Guide: Exhaust Valve 10883053 5120-00-448-7993 (TM 9-2815-247-34P) Installing exhaust valve guide 100 * Replacer, Valve Guide: Intake Valve 10883052 5180-00-448-0402 (TM 9-2815-247-34P) Installing intake valve guide WP 0176 00-9