TM-9-2815-220-24 Maintenance Manual for AVDS-1790-2CA AVDS-1790-DA and AVDS-1790-2DR Engines Download
Page 1502 of 1563
TM 9-2815-220-24 TOOL IDENTIFICATION LIST 0176 00 79 Pliers, Retaining Ring WT28163 5120-00-752-9755 (TM 9-2815-247-34P) (79) Pliers, Snap Ring WT28163 5120-00-752-9755 (TM 9-2815-247-34P) 80 * Pliers, Retaining Ring: Fan Drive Shaft B107.19 5120-00-752-9755 (TM 9-2350-253-20-1) Removing or installing inner fan drive shaft retaining ring 81 Pliers, Retaining Ring (Set) 4440R 5120-00-789-0492 (SC 5180-95-CL-B08) (81) Pliers, Snap Ring (Set) 4440R 5120-00-789-0492 (SC 5180-95-CL-B08) 82 Pliers, Wire Twister 8491162 5120-00-542-4171 (SC 4910-95-CL-A31) 83 Plug, pipe MS14314-1 4730-00-011-2578 Fuel/water separator operation tests 84 Pop Riveter (Blind, Hand) 98 5120-00-017-2849 (SC 3470-95-CL-A08) (13) Probes, Brass Wire (1/8 inch) RCUZN-B 0.125 2432-00-252-8353 (CTA 50-970) (25) * Protector , Crankcase: Cylinder Mounting Pads 10882790 4910-00-795-7951 (TM 9-2350-253-20-1) Protecting crankcase at cylinder removal (1 required per cylinder) 85 Puller Kit, Universal (Sliding Hammer, 2-1/2 lb) 1178 5120-00-313-9496 (SC 4910-95-CL-A31) 86 * Puller, Exhaust Valve Guide 10882954 5120-00-448-0401 (TM 9-2815-247-34P) Removing exhaust valve guides 87 * Puller, Intake Valve Guide 10882953 5120-00-448-0400 (TM 9-2815-247-34P) Removing intake valve guides 88 * Puller, Mechanical: Slide Hammer, 10-inch long with 1/2-20 UNF-2A Thread 8708712 5120-00-310-4668 (TM 9-2815-247-34P) Used with ADAPTER– 8375091 to remove starter and generator drive idler gear shaft and with SPREADING TOOL–8708361 to remove main bearing caps removing exhaust valve guides 89 * Puller, Mechanical: T-Handle, 3/4-16 UNF-2A 6-1/2 inch long 8761297 5120-00-678-5282 (TM 9-2815-247-34P) Removing and installing camshaft drive shaft and upper gear oil transfer plug (44) * Puller, Mechanical: Fuel Injection Nozzle 12275805 5120-01-119-4172 (TM 9-2815-247-34P) Removing fuel Injection nozzles WP 0176 00-8