TM-9-2815-220-24 Maintenance Manual for AVDS-1790-2CA AVDS-1790-DA and AVDS-1790-2DR Engines Download
Page 1462 of 1563
TM 9-2815-220-24 FAN DRIVE HOUSING BASE (DAMPER END) REPAIR 0170 00 INSTALL 1. Install fan drive housing base. a. Install new O-ring (7) (item 63, WP 0175) into crankcase. b. Apply a thin coat of sealant (item 33, WP 0173) on crankcase mounting surface of base (1). c. Install base (1) over studs (11) and onto crankcase. d. Apply a small amount of Lubriplate (item 23, WP 0173) to ten studs (11), and two screws (5). e. Secure base (1) to crankcase with ten slotted plain nuts (3) and flat washers (4), two screws (5), and flat washers (6). f. Tighten ten slotted nuts (3) and two cap screws (5) to 23-25 foot-pounds (31-34 N•m). g. Secure ten slotted nuts (3) with new cotter pins (2) (item 48, WP 0175). 2 3 4 5 6 1 11 7 END OF WORK PACKAGE WP 0170 00-4