TM-9-2815-220-24 Maintenance Manual for AVDS-1790-2CA AVDS-1790-DA and AVDS-1790-2DR Engines Download
Page 1433 of 1563
TM 9-2815-220-24 REAR FAN DRIVE REPAIR 0168 00 ASSEMBLY 1. Determine shim thickness for [drive] bevel gear shaft (4). a. With endplay removed from bearing, measure total thickness of bearing from inner race to outer race. b. Add shims until a total thickness of 0.7891-inch (20.0431 mm) minimum to 0.7911-inch (20.0939-mm) maximum is obtained. c. Old and new shims may be mixed to obtain correct overall thickness. 2. Install bearing (2). a. Position shims (6) of predetermined thickness over bearing hub of bevel gear shaft (4). b. Using an arbor press (5), press new ball bearing (2) (item 294, WP 0175) onto bevel gear shaft (4) with trademark facing outward. 5 4 6 6 4 2 2 3. Install bearing housing (1) over ball bearing (2). 4. Install shaft (3) into bevel gear shaft (4). 2 4 3 1 WP 0168 00-7