TM-9-2815-220-24 Maintenance Manual for AVDS-1790-2CA AVDS-1790-DA and AVDS-1790-2DR Engines Download
Page 1407 of 1563
TM 9-2815-220-24 FUEL INJECTION ADVANCE CONTROL TEST 0162 00 TEST (Continued) 9. Turn speed regulator control (8) to zero (0) to reduce speed and push stop switch (31). 10. Turn electronic counter switch (13), motor switch (7), and master switch (4) to the “OFF” position. 11. Check the readings taken at each 200 rpm increase against similar points on the approved advance curve. a. If the advance readings fall within the prescribed limits on the curve, the test is complete, go to "After Test" in this work package. b. If the readings do not meet the curve limits, go to "Adjustment Procedure" in this work package. 3 8 4 13 1 7 WP 0162 00-11