TM-9-2815-220-24 Maintenance Manual for AVDS-1790-2CA AVDS-1790-DA and AVDS-1790-2DR Engines Download
Page 1405 of 1563
TM 9-2815-220-24 FUEL INJECTION ADVANCE CONTROL TEST 0162 00 TEST (Continued) 5. Note and record reading from electronic counter (14). a. The next page of this work package has a form for recording this data. 6. Press oil drain switch (30). a. The oil pressure indicator gauge (27) should register zero (0) psi (0 kPa) with the switch depressed. b. Observe electronic counter (14) with the switch depressed. If the counter has changed more than 2 degrees, the advance unit requires adjustment. Refer to adjustment procedure in this work package. 7. Release oil drain switch (30) and turn speed regulator control (8) clockwise to increase the speed to 600 rpm. a. Note and record the electronic counter (14) reading at each 200-rpm increment beginning at 600 rpm and continuing through 2600 rpm. 8. Reduce speed to 600 rpm and recheck electronic counter (14) reading. a. If this reading does not repeat the original reading, repeat the test. 27 8 14 30 WP 0162 00-9