TM-9-2815-220-24 Maintenance Manual for AVDS-1790-2CA AVDS-1790-DA and AVDS-1790-2DR Engines Download
Page 1399 of 1563
TM 9-2815-220-24 FUEL INJECTION ADVANCE CONTROL TEST 0162 00 BEFORE TEST (Continued) CAUTION In order for the test stand to function properly, the following steps must be followed. 2. Test stand (1) setup. a. Assure that master switch (4) oil heater switch (5), jog run (clutch engage) switch (6), and the motor switch (7) are all in the “OFF” position and that the speed control (8) is at zero (0). b. Turn the master switch (4) to the “ON” position. The power indicator light (9) should be on. If the power indicator light does not light, press the reset button (10). If light does not come on, investigate and correct the fault before proceeding. c. Turn oil heater control (11) to a setting of 200 °F (93.33 °C). 4 5 9 7 6 8 10 1 11 1 WP 0162 00-3