TM-9-2815-220-24 Maintenance Manual for AVDS-1790-2CA AVDS-1790-DA and AVDS-1790-2DR Engines Download
Page 1397 of 1563
TM 9-2815-220-24 FUEL INJECTION ADVANCE CONTROL TEST 0162 00 THIS WORK PACKAGE COVERS: Before Test, Test, and After Test INITIAL SETUP: Tools: Fuel injection advance test stand (item 116, WP 0176) General mechanic’s tool kit (item 121, WP 0176) Torque wrench, 0-300 inch-pounds (item 124, WP 0176) Mandatory Replacement Parts: Cotter pin (2) (item 47, WP 0175) Expendable and Durable Items: Lubricating oil, MIL-L-45199 (item 21 WP 0173) Diesel fuel, VV-F-800 (DF-2) (item 12, WP 0173) Non-electrical wire (item 44, WP 0173) Personnel Required: Track Vehicle Repairer (1) 63H10 Equipment Conditions: Repaired/Assembled Fuel Injection Advance Control (WP 0161) BEFORE TEST NOTE Testing of the fuel injection pump advance unit is required on all units that have been repaired to ensure optimum engine performance. In addition, testing of the advance unit should be accomplished whenever the engine is overhauled. Testing will be accomplished prior to assembly of the engine rear fan and accessory drive housing assembly. Test stand (1) is designed to check and bench-test the advance characteristics of the fuel injection pump advance unit under conditions simulating engine operation over an operating range of 200 to 2600 rpm. 1 WP 0162 00-1