Covering the politics, Business and technology of defense - Subscribe Today

TM-9-2815-220-24 Maintenance Manual for AVDS-1790-2CA AVDS-1790-DA and AVDS-1790-2DR Engines Download

Page 1394 of 1563

TM 9-2815-220-24 FUEL INJECTION ADVANCE CONTROL REPAIR 0161 00 ASSEMBLY (Continued) 10. Assemble flyweight assembly (3). a. Assemble two spring retainers (18) and two seats (19) onto each new compression spring (17) (item 242.1, WP 0175) to make two spring assemblies (37). NOTE Compression springs and seats are attached to slots in flyweight with roll pins driven through retainer loops. b. Install ends (retainer loop) of spring assemblies (37) into slots in flyweights (16) one at a time securing each end with a new roll pin (20) (item 23, WP 0175). 11. Install flyweight assembly (3) onto adjusting ring (2) with two threaded pins (11). 12. Spread flyweight assembly (3) and install fluid regulating valve (14) in adjusting ring (2) so slots in fluid regulating valve are aligned with threaded pins (11). 14 3 2 2 14 18 19 17 19 16 11 37 37 18 20 WP 0161 00-18