TM-9-2815-220-24 Maintenance Manual for AVDS-1790-2CA AVDS-1790-DA and AVDS-1790-2DR Engines Download
Page 1389 of 1563
TM 9-2815-220-24 FUEL INJECTION ADVANCE CONTROL REPAIR 0161 00 INSPECTION (Continued) 19. Bearings (12 and 34) are mandatory replacement items. a. New bearing dimensions, (A, B, C, and D), are provided for information purposes only; you need not perform the measurements. 20. Measure inside diameter (E) of bearing support (1). a. Replace support if not within specifications in the following table. 21. Measure inside diameter (F) of eye bracket (35). a. Replace eye bracket if not within specifications in the following table. Location Sizes and Fit of New Parts inches (mm) Wear Limits A (Bearing outside diameter) 3.1491 (19.9871) 3.1496 (79.9998) None B (Bearing inside diameter) 1.9680 (49.9872) 1.9685 (49.9999) None C (Bearing outside diameter) 3.5427 (89.9846) 3.5433 (89.9998) None D (Bearing inside diameter) 2.1648 (54.9859) 2.1654 (55.001) None E (Bearing support) 3.1495 (79.9973) 3.1501 (80.0125) 3.1504 (80.0201) F (Eye bracket) 3.5432 (89.9973) 3.5440 (90.0176) 3.5442 (90.0227) 34 35 12 1 E B D C F A WP 0161 00-13